If this transmitter is shipped to a USA address, it will be locked down on 910Mhz, user cannot change the frequency. (FCC restriction).
Highly integrated 900 MHz, 800mW transmitter with digital display. Very low heat. Compact size, low power consumption. The frequencies associated with the 4 channels are: CH1: 910 MHz (in USA and Canada use only this channel), CH2: 980 MHz, CH3: 1010 MHz, CH4: 1040 MHz.
|Frequency Band:||900MHz||Number of Channels:||4|
|Modulation:||FM||Transmission Range:||1 km plus|
|Power Consumption:||500mA||Output Power:||800mW|
|Operation Voltage:||12V||Power Supply:||12V/500mA (not included)|
|Antenna Connector:||SMA Connector||Weight:||7.9 g|
|Dimensions:||50.0 x 25.7 x 8.0 mm||Recommended Receiver||900MHz 12Ch Recevier|
Note: While this transmitter might work with other 900Mhz receivers as well, please note only guarantee the above ranges and signal quality when used in conjuntion with the 900Mhz 12Ch Receiver
Warranty: 6 months
Note: The use and operation of this product will require a HAM or Amateur radio license.
Important note for Canada customers:
Please note: channels 2,3,4 of this transmitter are outside of the amateur frequency spectrum for Canada. These channels cannot be legally used even if you have a Radio Amateur or HAM license. Please make sure that you obey Industry Canada regulations around use of these devices. New Generation Hobbies cannot be held responsible for using these transmitters on channels which are outside of the legal allowed frequency ranges.
For all other countries please check the regulation around amateur use and frequency spectrums before ordering this product.
This product was added to our catalog on Saturday 07 March, 2009.