CALL US : (416) 642-6830
Armattan Chameleon TI FrameArmattan Chameleon TI Frame
Click to enlarge

Armattan Chameleon TI Frame

Price :
$100.00USD
Add to Cart:
  • Model: ARM-CHAM-TI
  • 0 Units in Stock

DESCRIPTION

The Chameleon Titanium is the evolution of the all time favorite Chameleon released back in 2016. Better materials are used and many lessons learned with the Chameleon are revised in this new, state of the art design.

- Improved carbon fiber - The same material that debuted with the Rooster.
- Lighter, easier to build
- Incredibly tough Titanium front end
- Fewer total bolts, and no more M2 bolts. ALL M3 
- Better VTX mounting provisions
- Better anchoring provisions for 3D printed parts 

We know we can't always please everyone, but there is no reason not to offer both unibody (Chameleon Ti) and modular (Rooster) versions of our latest Titanium flagship model(s). We have been listening and now you have both options.

Specifications:

  • - Color: Silver (Titanium)
  • - Frame Weight: 118g approx.
  • - Motor to Motor: 220mm
  • - Frame Shape: Compressed X
  • - Bottom Plate Thickness: 4mm
  • - Top Plate Thickness: 2mm
  • - Aluminum Parts: Titanium Cage, Aluminum Standoffs
  • - Motor Mount Pattern: 22xx
  • - Center Stack Mount: 30.5mm
  • - FPV Camera Mount: 28.5mm (Swift V2, Arrow V3, etc.)
  • - FPV Camera Tilt: 25-60 degrees
  • - Max Stack Height: 22mm
  • - Warrantied Parts: Bumper-to-Bumper
  • - Recommended Motor Size: 2306/2300KV
  • - ESC required: min: 30A
  • - Propeller size: 5"
  • - Lipo size recommended: 4-6S/1300mAh depending on motor KV.

Included parts:

Titanium:

  • - 2x Camera-cage braces

Hardware:

  • - 5x 4mm button-head M3 bolts
  • - 8x 6mm button-head M3 bolts
  • - 6x 10mm button-head M3 bolts
  • - 3x 12mm button-head M3 12.9 grade steel bolts
  • - 5x 16mm button-head M3 bolts
  • - 6x 8mm M2 cup-head (camera) bolts6x 8mm M2 cup-head (camera) bolts

Aluminum:

  • - 1x 28.6 Front standoff (silver
  • - 2x Rear standoffs (black)

Nylon:

  • - 5x 6mm standoffs
  • - 5x nuts

Carbon Fiber:

  • - 1x 2mm Top (LiPo) plate 
  • - 1x 1.5mm HD Cam plate
  • - 1x 2mm Rear VTX plates (Standard and TBS)
  • - 1x 4mm Main plate 5 inch

Other:

  • - 1x Lipo strap
  • - 1x LiPo foam pad
  • - 1x HD camera foam pad
  • - 4x Dog-bone landing pads
  • - 1x Molded rubber SMA grommet (included with standard VTX plate)
  • - 3x Molded rubber antenna tube mounts (included with standard VTX plate)
  • - 1x 4mm Shim plate

WHAT ELSE IS NEEDED?

  • - Flight Controller
  • - PDB - or all in one FC
  • - ESCs x4 - or 4 in 1 ESC
  • - Motors x4
  • - Receiver [+ Transmitter of course!]
  • - LiPo(s) [+LiPo Charger]
  • - Lots and Lots and Lots of Props!