CALL US : (416) 642-6830

Matek PDB with 5/12BEC and XT-60

Price :
$7.45USD
Add to Cart:
  • Model: SKU388730-1ABJ0
  • 0 Units in Stock

DESCRIPTION

This PDB has been designed and engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB layout. It supports power from a LiPo pack up to 6 ESCs, as well as provides regulated DC 5V outputs & linear regulated DC 12V for powering devices requiring 12V.

On the side it has a mount for an XT60 connector without requiring additional wiring.

Specifications:

  • -Input voltage range (3S-4S LiPo operation): 9 - 18V DC
  • -Regulated 5V and 12V outputs
  • -LED power indicators ( 5V & 12V outputs )
  • -6 ESC outputs & 1 pair VCC/GND pads
  • -Continuous current: 25A*4 or 15A*6
  • -Peak current (10 seconds/minute): 30A*4 or 20A*6
  • -Short-circuit tolerant (5 seconds/minute)
  • -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
  • -Continuous current: 2 Amps (Max.2.5A 10s/minute)
  • -Voltage: 5.0 +/- 0.1VDC-DC/DC synchronous buck regulator.
  • -Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • -Short-circuit tolerant (2 seconds/minute)
  • -Continuous current: 500mA (Max.0.8A 5s/minute)
  • - Voltage: 12.0 +/- 0.3VDC
  • -The battery should be 4S LiPo (13~18V DC)
  • -Designed for Video TX or FPV camera with linear regulator.

Physical:

  • -Dimensions: 36 x 50 x 4 mm (without XT60)
  • -Mounting: 30.5 x 30.5mm, ?3mm
  • - Weight: 7.5g(w/o XT60), 11g(w/ XT60)