CALL US : (416) 642-6830
Micro Minim OSDMicro Minim OSD
Click to enlarge

Micro Minim OSD

Price :
Add to Cart:
  • Model: SKU269011
  • 11 Units in Stock


This is the MICRO Minim OSD with the KV Team MOD For Naze32 Flight Controllers. The Micro Minim OSD has the KV Team mod, this revision is a presented in a very small 16x16mm PCB board. 

It was possible to minimize the size due to the missing onboard power regulator or in other words DC/DC converter. Without it this board generates much less heat and can be powered directly from the flight controller.
The Micro Minim OSD hardware wise is very similar to the Minim OSD hardware, however the Micro has custom modification to take advantage of custom firmware options.
Now with this you can choose firmware that is MAVLink compatible for ArduCopter, or MultiWii compatible for Baseflight / Cleanflight control boards as well alongside the Acro Naze32 and the Naze32 boards.


- No voltage regulator to avoid overheating, power it from the FC board via 5 volts
- pinout compatible with FTDI cable programming cables
- 6-pin ISP header
- Two LED indicators
- ATmega328P with Arduino bootloader
- MAX7456 chip for on-screen imaging
- 16 x 16mm size
- Analog or Digital PWM RSSI signal input pin/pad
- Current Sensor pin/pad
- Ca be used standalone, or with APM / Flip / Flip32+/Naze32/Acro-Naze32 flight controllers
- AD converter for up to two maximum 4S batteries
- This board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
- Two independent power sections with an LED indicator on each.

Package content:

1 x Micro Minim OSD board
1 x straight header set
1 x right angle header set

Setup Instructions: