CALL US : (416) 642-6830
XRotor Flight Controller F4 nano + 4 in 1 20A ESC boardXRotor Flight Controller F4 nano + 4 in 1 20A ESC board
Click to enlarge
XRotor Flight Controller F4 nano + 4 in 1 20A ESC board XRotor Flight Controller F4 nano + 4 in 1 20A ESC board XRotor Flight Controller F4 nano + 4 in 1 20A ESC board XRotor Flight Controller F4 nano + 4 in 1 20A ESC board XRotor Flight Controller F4 nano + 4 in 1 20A ESC board XRotor Flight Controller F4 nano + 4 in 1 20A ESC board

XRotor Flight Controller F4 nano + 4 in 1 20A ESC board

Price :
$79.90USD
Add to Cart:
  • Model: 088718518307
  • 0 Units in Stock
  • Manufactured by: Hobbywing

DESCRIPTION

This is a nano 27mmx27mm flight controller and ESC combo that works. Period.

Features:

  • - STM32 F405 MCU: allows the FC to run the PID looptime and gyro with higher frequency.
  • - SPI Sensor MPU6000: includes an accelerometer and a gyro.
  • - Onboard OSD microchip: supports the DMA mode allows users to adjust its parameters via the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
  • - The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software is more applicable to FPV race.
  • - TF-card which can record and save more flight/black box data allows users to adjust the setup of their aircraft easily.
  • - Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM and etc.
  • - LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
  • - Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current (CRT port) (extra current meter is needed).
  • - Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing the flight status of the aircraft.
  • - Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters)

Specifications:

  • - Application: FPVs with 130 Diagonal Wheelbase or below
  • - FC Programming: supported
  • - Programming via: Betaflight/Cleanflight-configurator
  • - Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,
    Dshot600, Dshot1200, Proshot1000
  • - Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS,  ETIEXBUS, CRSF, SRXL
  • - OSD: Buit-in
  • - Voltage Monitoring: Supported
  • - Current Monitoring: Supported
  • - External Buzzer: Supported
  • - LED Control: Supported
  • - BEC: 5V @ 1.5A
  • - USB Port: MicroUSB
  • - Size/ weight: 27x27mm / 3.3g
  • - Mounting hole spacing: 20x20mm

Contents:

  • - One F4 nano Flight Controller board
  • - One 4 in 1 20A ESC board

Manual:

  • To access the manual for this board, please click on the following link: Manual Download

SKU: 38040028