The Distribution boards for Mikrokopter Quads and Mikrokopter Okto does not have built in LED control as the distribution board for Hexa and Hexa XL. This little circuit was designed to be soldered on top of the distribution board along the BL controller number 3. With it's low profile and very small footprint it is almost invisible - but it gies an extra feature to your Mikrokopter - the possibility to control the LED's underneath from switches of the remote control - or based on fucntions being activated. One could achieve the following setup:
- Free flight - no LED's on
- GPS position hold - LED's slowly flashing
- Coming home - or waypoint navigation - LED's on.
Using the ED driver will also vige you visual indication of the battery status when you cannot hear the buzzer - the LED's connected to the LED driver will flash rapidly indicating that the battery is low.
This package contains one MK LED Driver board - each of these is designed to control 2 separate channels, so you can set the red strip and the blue strips on different patterns or diferent activation sequeces. The flashing pattern and the activation sequence is controlled by the "Output" tab in the MKTools -> Settings window.
The package contains:
Setup and installation guide: Click here to download or open
Demo Video: http://vimeo.com/22063018
This product was added to our catalog on Monday 04 April, 2011.