This is a 10A BEC - Battery Eliminator Circuit from Castle Creations. For it's small size this little circuit will supply plenty of power to your ground or in air circuits.
The output voltage is se by default to 5.1V but it is user programmable with a Castle Creations USB connector - sold eslewhere.
This is a perfect companion to our EzAntena Tracker - as it supplies plenty of power to drive the 2 servos of the pan ant tilt system.
Input voltage: 5V to 25.2V - 2 to 6 cell LiPo
LED: LED on indicates proper operation. If the LED is off check the settings for proper setup.
Current output: Peak 10 Amps
less than 12V input = 7Amps
less than 24V input = 5Amps
This product was added to our catalog on Tuesday 03 November, 2009.