Videos
This page holds the test videos we made during the development of our equipment. Watching these videos will show you exactly what you can expect from our products.
November 17th, 2007 Tests:
The setup was the following:
Transmitter: New Generation Hobbies 611 Transmitter - 100mW transmitting power. Receiver: New Generation Hobbies Advanced Receiver with the Diversity Module 635. The receiver/antenna setup: It is illustrated in the following thread: http://www.rcgroups.com/forums/showthread.php?t=773069
Ch. 1 The flight range is about 500 meters left and right from the flying station - total flight distance is about 800 meters. On this channel I am picking up heavy interference. The video has not been altered in any way - this is the exact footage of the flight. | Ch. 2. On this channel I am picking up less but still visible interference. The video has not been altered in any way - this is the exact footage of the flight | Ch. 3. On the middle of the field the video quality gets worse - this is when the diversity switches from one input to the other one. The video has not been altered in any way - this is the exact footage of the flight. | Ch. 4. On this channel I am picking up almost no interference. The flght battery died in the middle of the flight - so I had to circle around and land. The video has not been altered in any way - this is the exact footage of the flight. |
November 11th, 2007 Tests:
Transmitter: 100mW Ngh-Txm-611 module Receiver: Ngh-Rs-01 with the upcoming Ngh-Rm-635 installed Note: The receiver is set to Channel 2, since on Channel 1 I was picking up some intereference. | Transmitter: 100mW Ngh-Txm-611 module Receiver: Ngh-Rs-01 with the upcoming Ngh-Rm-635 installed Note: The receiver is set to Channel 3, since on Channel 2 I was still picking up some intereference. You can see real improvement on video quality here. | Transmitter: 100mW Ngh-Txm-611 module Receiver: Ngh-Rs-01 with the Ngh-Rm-634 installed Note: The receiver is set to Channel 3, this channel was clear of intereference in the previous tests. The 8dBi patch is static, pointing approx toward the plane 30 degrees up. | Transmitter: 100mW Ngh-Txm-611 module Receiver: Ngh-Rs-01 with the Ngh-Rm-634 installed Note: The receiver is set to Channel 3, this channel was clear of intereference in the previous tests. The 8dBi patch is held and pointed toward the plane by an assistant. |